MANUALLY ASSEMBLED PLASTIC SLIDE MOUNTS

APP 313500 - CS slide mounts 5x5 (24x36) C.A.M.

Plastic slide mount manufactured in accordance with DIN 108 Standard. Especially designed for CS magazine use. It can also be used with all other existing slide magazines. Standard slide mount. Manual or semi-automatic assembly via small assembler AP PROMOUNTER II C.A.M. System. Two book-shaped pieces. Closure by pressing. Four internal pins ensure correct slide placement. Closure and opening by pressing grooves on both sides of the mount.

Available in black/white.
Cardboard box with 100 units.

APP 313900 - AP Promounter CS II (C.A.M. System)

This small AP assembler is specially designed for 5x5 (24x36) C.A.M. System (APP 313500) CS slide mounting. It is user-friendly and allows easy slide mounting, obtaining professional results. It has an illuminated zone with lateral spots enabling centred stills. Film is pulled along through the perforations and guarantees no film scratching at any moment of the cutting and mounting phase. Stills are cut by the movement of a circular blade. It has been manufactured complying with the current EU electrical regulations. It works with two batteries, not included, model LR14 of 1.5 V. It has a spare light bulb located at the inside bottom of the assembler.

Measurements: 170x110x90 mm.

APP 313100 - Slide mounts 7x7 (6x6)

Plastic mount of 7x7 mm, glassless, manually assembled and closure by pressing at the four corners.

Cardboard box of 25 units.

NTR 313200 - Slide mounts 5x5 (18x24)

Plastic mount of half format, manually assembled and closure by pressing at the four corners. It can used with all slide magazines available in the market. Standard name mount. Manufactured in blue/white colours.

Supplied in retractable packages of 300 units.

Slide mounts 5x5 (24x36)

Manufactured in accordance with DIN 108 Standard. They can be used with all slide magazines available in the market. Standard name mount. Book-shaped plastic mount, closure by pressing with groove to facilitate opening. Manufactured in grey/white colours.

APP 313440 Plastic box with 40 units.
APP 313420 Cardboard box with 100 units.
APP 313410 Retractable package with 400 units.

CS slide mounts 5x5 (24x36)

Manufactured in accordance with DIN 108 Standard. Especially design to be used with CS magazines, but they can also be used with all slide magazines available in the market. Standard name mount. Book-shaped plastic mount, closure by pressing with groove to facilitate opening. Manufactured in grey/white and black/white colours.

APP 313360 Blister with 40 units.
APP 313320 Cardboard box with 100 units.
APP 313300 Retractable package of 400 units.