AP Barniz Acrílico para Lienzos Satinado 500 ml

Water-based, odourless, satin varnish specially designed for the protection of canvases printed with water-based plotters pigmented ink, which will give the canvas greater resistance to scratches and facilitate cleaning with a damp cloth and even with soap if necessary.

Use short-pile synthetic wool lacquer rollers or foam lacquer rollers (roller handle). Apply the pure undiluted varnish to the tray.
Load the roller and unload the excess product from the roller in the same tray to avoid leaving sectors where too much product accumulates, try to make the application crosswise to cover all sectors correctly.

The varnish will dry in approximately 15 minutes, but the curing that will form great protection to the image will consolidate in approximately 24 hours. So if you are going to mount the varnished canvas on a stretcher, we recommend doing it after it has been dry so that the curing is done on the hoop itself.

A single coat of varnish is sufficient, but make sure the canvas has even coverage. If not, do not check if the drying process has already started, wait for it to dry and apply a second coat.

Also available in 5 litre bottles