Cricut Smart Iron-on Heat Transfer Vinyl Red 33×273 cm

RRP:43,60€ IVA incl.

Cutting vinyl for Maker 3/Explorer 3

Heat transfer vinyl for personalising your garments: T-shirts, denim jackets, backpacks and much more. mat. You don’t need to use a mat, simply load the material and you’re ready to go.

With the new Cricut Smart materials you don’t have to use a mat; they load directly into the machine and stay aligned without any additional adjustment. You can make cuts of up to 3.6 m in length in a single pass.

Includes 1 roll of 33 cm x 273 cm (13″ x 107″), compatible only with Cricut Explore 3 and Cricut Maker 3.

Cuts very precisely and weeds easily.

Lasts for more than 50 washes.

Código AP: CUT100319 |

SKU: 2008692 |

EAN: 0093573482274

In stock

¿Eres profesional del sector?

Accede a tarifas de distribuidor desde 1 unidad y descuentos exclusivos por volumen.

Solicitar acceso como profesional

Cricut Smart Iron-on Heat Transfer Vinyl Red 33×273 cm

INSTRUCTIONS FOR USE

– Preheat the Cricut EasyPress to 155ºC.

– Place the material on the mat.

– Preheat the cotton garment for 5 seconds.

– Position the material on the garment with the transparent carrier sheet facing up.

– Protect with a sheet of silicone paper.

– Iron at 155ºC for 30 seconds with light pressure.

– Turn the garment inside out and iron again for 15 seconds.

– Peel off the carrier sheet while hot.

WASHING INSTRUCTIONS

– Wait 24 hours before washing.

– Wash and dry inside out.

– Do not use harsh chemical agents or bleach.


Productos relacionados con este producto